The outdoor finish commercial projects keep specifying — without the maintenance bill that follows. VerdeLife delivers a premium composite decking surface across eight classic finishes, built to hold its colour and profile for the full life of the project.
Wholesale & trade pricing available. Custom sizes, colours, and packaging on request.
ABOUT THIS PRODUCT
The VerdeLife collection is a co-extruded WPC board engineered for the performance benchmarks Australian commercial projects require — a recycled hardwood fibre core bonded within a 0.95 g/cm³ HDPE matrix, protected by a 0.8 mm co-extruded polymer cap layer.
The hollow-profile design at 140 × 23 mm delivers structural rigidity across standard joist spacings while keeping board weight manageable on elevated decks, rooftop terraces, and upper-storey applications.
0.8 mm
Cap Layer Thickness
Thicker than most competing composite decking products on the Australian market
ΔE ≤ 4–5
Colour Shift · 3,000 hrs QUV
Proven UV colour stability for Australia's extreme UV index conditions
R11
Slip Rating · AS/NZS 4586
Suitable for pool surrounds, wet areas, and commercial applications
26.2 MPa
Flexural Strength · EN 15534
Structural confidence for commercial project specifications
We supply factory-direct to building material wholesalers, commercial builders, and property developers across Australia — with the flexibility your projects demand:
TECHNICAL DATA
Dimensional and packing data for project planning and procurement.
Product Detail
The VerdeLife board is co-extruded with a 0.8 mm polymer cap layer — thicker than many competing products currently available through Australian distributors. Applied via a full co-extrusion process that permanently fuses it to the composite core, this cap forms an unbroken barrier against UV degradation, surface staining, moisture ingress, and abrasion. Unlike painted or single-layer laminated alternatives, it cannot peel, flake, or delaminate over the board’s service life.
The hollow-profile cross-section is engineered to distribute load efficiently across standard 300–350 mm joist spacings, making VerdeLife suitable for both elevated residential decks and specification-grade commercial applications. The cap layer is UV-stabilised using a dual-system package combining Hindered Amine Light Stabilisers (HALS) with UV absorbers — formulated to achieve a colour shift of ΔE ≤ 4–5 after 3,000 hours of QUV accelerated weathering, a critical performance result in a country that records some of the highest UV index readings on Earth.
VerdeLife decking is tested and certified to international and Australian standards, giving wholesalers and specifiers the documentation required for commercial project sign-off.
| Standard | Scope | Result |
|---|---|---|
| AS/NZS 4586 | Slip resistance | R11 |
| EN 15534 | Flexural strength | 26.2 MPa |
| ASTM D1037 | Water absorption | 0.2% |
| QUV Accelerated Weathering | Colour shift after 3,000 hrs | ΔE ≤ 4–5 |
| EN 717-1 | Formaldehyde emission | Not detected |
| CE / ISO / RoHS / SGS | General compliance | Certified |
Full OEM / ODM services are available covering board length, width, colour, surface embossing, packaging, and quality grade — including custom mould development for unique profile requirements.
Supply programmes are structured for building material wholesalers, commercial builders, landscaping retailers, and property developers. Contact our trade team for current MOQ details, lead times, and volume pricing tiers.
Colour Range
All colours are co-extruded into the board surface — not painted — ensuring colour retention for the life of the product. Custom colours available for volume orders.
WN01
TK01
TK02
OAK01
RB01
AT01
SI02
SI01
MATERIAL COMPARISON
Hardwood decking demands annual oiling, greys rapidly under Australia’s UV load, and remains defenceless against termites without ongoing chemical treatment. VerdeLife composite decking replicates the natural timber aesthetic with none of the lifecycle cost — holding its colour and profile for the full duration of its warranted service life.
Yes. VerdeLife decking is engineered for the full range of conditions Australian builders encounter: UV index readings above 11 in summer, coastal salt air, high humidity, and active termite zones. The co-extruded cap layer resists UV-driven fading and surface cracking, and the composite core contains no exposed cellulose — giving termites no material to target throughout the board’s service life.
No — not ever. Hardwood decking requires annual oiling and periodic sealing to prevent splitting and surface greying. VerdeLife only needs an occasional wash with mild soap and water to maintain its appearance throughout its warranted service life.
Eight standard finishes are available from stock: Rosewood, Teak, Teak Classic, Oak, Walnut, Ancient Wood, Dark Grey, and Phantom Grey. Custom colour matching is available for wholesale orders above MOQ.
VerdeLife decking is rated R11 under AS/NZS 4586 and DIN 51130 — suitable for wet areas, pool surrounds, and commercial applications where slip resistance is a compliance requirement.
Yes. Full OEM/ODM services are available covering board length, width, colour, surface texture, embossing pattern, packaging, and quality grade. Custom moulds can be produced for unique profile requirements. Contact us for a quote and current lead times.
Each box of the 150 × 23 × 3000 mm profile covers 1.36 m². Divide your total deck area by 1.36, then add 10–15% for cutting waste. For large commercial projects, send us your plans and our team will provide a full materials estimate at no charge.
300–350 mm centres for residential and commercial foot-traffic applications.
LastElegance is a leading wood–plastic composite manufacturer from China. Contact us to get a quote and samples. If our standard size and color options do not perfectly match what you are looking for, we can also provide customized services.
The company consistently adheres to a “customer-centric” service philosophy and provides customers with a comprehensive range of one-stop service solutions. From product consultation and solution design to production, delivery, installation, and after-sales support, our professional service team ensures that every stage meets customer needs.
