Composite decking, cladding and screening — wholesale, direct from the manufacturer

Australian importers, merchants, builders and contractors buy direct from us. Minimum order 500 m² in total, made up any way you like across all three ranges and all six colours.

500 m²

Minimum order, any mix

15–20 days

Production, plus 2 days packing

24–32 days

Sea freight to Australian ports

15–30 years

Warranty, by product range

Get a quotation

We reply within one business day, Monday to Friday. The more you can tell us about volume and timing, the more specific the first quotation will be.

Trade Account Application

Tested, not claimed

Every figure below comes from a test report we send with your quotation.

Cap layerCo-extruded, 0.8 mm
Flexural strength26.2 MPa (EN 15534)
Slip resistanceR11 (AS/NZS 4586)
Colour retentionΔE ≤ 4–5 after 3,000 hours QUV
Water absorption0.2% (ASTM D1037)
FormaldehydeNot detected (EN 717-1)
Recycled content60% recycled HDPE, 40% virgin; density 0.95 g/cm³
Joist spacing300 mm recommended
Quality control12 recorded checkpoints, inspection record supplied with shipping documents
WarrantyDecking 15 / 20 / 30 years by range; screening 15; cladding 20
Surface burningASTM E84: FSI 85, SDI 300

Board sizes

Decking — 138 to 150 mm wide, 20 to 25 mm thick, six profiles. See decking →

Cladding — 140 × 12 mm. See cladding →

Screening — 90 to 219 mm wide, 20 to 26 mm thick, five profiles. See screening →

Custom widths and thicknesses are available with tooling.

Questions we get before the first order

What is your minimum order quantity?

500 m² in total, across composite decking, cladding and screening in any mix of the six colours. Send us your volume and we will come back with pricing.

Do you quote FOB or CIF?

Both, and other terms as well. We quote on whichever incoterm suits how you buy — FOB if you have your own freight forwarder, CIF or another basis if you would rather we arrange it. Tell us your preference and your port of discharge and we will quote that way.

Can I mix decking, cladding and screening in one container?

Yes. All three ranges share the same six-colour palette and surface textures, so a mixed container arrives colour-matched across categories.

Do you have a BAL rating?

Our fire testing is to ASTM E84 (FSI 85, SDI 300), Tell us at enquiry stage if your project requires one.

What certifications do you hold?

Our plant is certified to ISO 9001 for quality management, ISO 14001 for environmental management and ISO 45001 for occupational health and safety. Certificates are supplied on request.

What happens after you apply

1. We check the details

If anything is missing — port of discharge, target month, colour preference — we ask before quoting, rather than sending a number you cannot use.

2. You get a quotation

Per square metre, on the incoterm you asked for, with a production schedule and an estimated arrival window.

3. Samples, then order

Most buyers see samples before committing. We can run samples and the quotation in parallel, so the timeline does not slip.